# MP31Z (ZW36M) — User Manual

**URL:** <https://forum.minoston.com/t/mp31z-zw36m-user-manual/46>\
**Category:** Documentation\
**Tags:** zwave-800, manual\
**Created:** [October 23, 2026, 9:24am UTC](https://forum.minoston.com/t/mp31z-zw36m-user-manual/46 "2026-10-23T09:24:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![MinostonCS](https://yyz2.discourse-cdn.com/flex050/user_avatar/forum.minoston.com/minostoncs/32/12_2.png) [@MinostonCS](https://forum.minoston.com/u/MinostonCS)\
**Post date:** [October 23, 2026, 9:24am UTC](https://forum.minoston.com/t/mp31z-zw36m-user-manual/46/1 "2026-10-23T09:24:50Z")

</div>

> **Model:** MP31Z · **Protocol:** Z-Wave 800 Series (908.42 MHz) · **Use:** Indoor

## Features

- 800 series chip — better coverage, faster communication
- S2 security + SmartStart quick pairing
- Mini size — two plugs fit on one outlet
- Built-in Z-Wave Plus signal repeater

## Specifications

| Item | Value |
| --- | --- |
| Input | 125VAC, 60Hz |
| Max load | 15A / 1875W |
| Frequency | 908.42 MHz |
| Certification | ETL certified |

## Button and LED behaviour

| Action | Result |
| --- | --- |
| Press 1× | Toggle on / off |
| Press 3× | Z-Wave inclusion / exclusion mode |
| Press 2× quickly, hold the 3rd for 10s | Factory reset |

- **Blue** — status / inclusion
- **Purple** — remove / exclusion
- **Red** — network failure

## Troubleshooting

| Symptom | Fix |
| --- | --- |
| Hub cannot find the device | Move the plug closer to the hub. Exclude it first, then include again. |
| LED does not light | Test the outlet with another device. |
| Works by button but not in app | Re-run inclusion and check the hub frequency band. |

## Download

[MP31Z(ZW36M) Manual.pdf](https://forum.minoston.com/uploads/short-url/2tRwC0lnC4nIhy1HJkAtFg7FvGE.pdf) (493.6 KB)
