Model: MP31Z · Protocol: Z-Wave 800 Series (908.42 MHz) · Use: Indoor
Features
- 800 series chip — better coverage, faster communication
- S2 security + SmartStart quick pairing
- Mini size — two plugs fit on one outlet
- Built-in Z-Wave Plus signal repeater
Specifications
| Item | Value |
|---|---|
| Input | 125VAC, 60Hz |
| Max load | 15A / 1875W |
| Frequency | 908.42 MHz |
| Certification | ETL certified |
Button and LED behaviour
| Action | Result |
|---|---|
| Press 1× | Toggle on / off |
| Press 3× | Z-Wave inclusion / exclusion mode |
| Press 2× quickly, hold the 3rd for 10s | Factory reset |
- Blue — status / inclusion
- Purple — remove / exclusion
- Red — network failure
Troubleshooting
| Symptom | Fix |
|---|---|
| Hub cannot find the device | Move the plug closer to the hub. Exclude it first, then include again. |
| LED does not light | Test the outlet with another device. |
| Works by button but not in app | Re-run inclusion and check the hub frequency band. |
Download
MP31Z(ZW36M) Manual.pdf (493.6 KB)