# MP22ZP (ZW96SP) — User Manual

**URL:** <https://forum.minoston.com/t/mp22zp-zw96sp-user-manual/65>\
**Category:** Documentation\
**Tags:** zwave-800, manual\
**Created:** [October 23, 2026, 9:28am UTC](https://forum.minoston.com/t/mp22zp-zw96sp-user-manual/65 "2026-10-23T09:28:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![MinostonCS](https://yyz2.discourse-cdn.com/flex050/user_avatar/forum.minoston.com/minostoncs/32/12_2.png) [@MinostonCS](https://forum.minoston.com/u/MinostonCS)\
**Post date:** [October 23, 2026, 9:28am UTC](https://forum.minoston.com/t/mp22zp-zw96sp-user-manual/65/1 "2026-10-23T09:28:14Z")

</div>

> **Model:** MP22ZP · **Protocol:** Z-Wave 800 Series Energy Monitor (908.42 MHz) · **Use:** Outdoor & Indoor (IP65)

## Features

- Energy monitoring — monitor usage and save on bills
- 800 series chip, up to 1300 ft with Z-Wave LR
- IP65 weather-resistant housing
- Schedule and timer support

## Specifications

| Item | Value |
| --- | --- |
| Energy monitoring | Yes |
| Frequency | 908.42 MHz |
| Max load | 15 A resistive (1875 W at 125 VAC) |
| Weather resistance | IP65 — do not immerse |

## Button and LED behaviour

| Action | Result |
| --- | --- |
| Press 1× | Toggle on / off |
| Press 3× | Z-Wave inclusion / exclusion mode |
| Press 2× quickly, hold the 3rd for 10s | Factory reset |

- **Blue** — status / inclusion
- **Purple** — remove / exclusion
- **Red** — network failure

## Troubleshooting

| Symptom | Fix |
| --- | --- |
| Hub cannot find the device | Move the plug closer to the hub. Exclude it first, then include again. |
| LED does not light | Test the outlet with another device. |
| Works by button but not in app | Re-run inclusion and check the hub frequency band. |

## Download

[MP22ZP (ZW96SP) Manual.pdf](https://forum.minoston.com/uploads/short-url/uuezQoUdCDEWpSbwmcqS78AKAp1.pdf) (11.5 MB)
