# MP21ZD (ZW39SU) — User Manual

**URL:** <https://forum.minoston.com/t/mp21zd-zw39su-user-manual/62>\
**Category:** Documentation\
**Tags:** zwave-800, manual\
**Created:** [October 23, 2026, 9:27am UTC](https://forum.minoston.com/t/mp21zd-zw39su-user-manual/62 "2026-10-23T09:27:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![MinostonCS](https://yyz2.discourse-cdn.com/flex050/user_avatar/forum.minoston.com/minostoncs/32/12_2.png) [@MinostonCS](https://forum.minoston.com/u/MinostonCS)\
**Post date:** [October 23, 2026, 9:27am UTC](https://forum.minoston.com/t/mp21zd-zw39su-user-manual/62/1 "2026-10-23T09:27:39Z")

</div>

> **Model:** MP21ZD · **Protocol:** Z-Wave 800 Series Dimmer (908.42 MHz) · **Use:** Indoor

## Features

- 1–100% stepless dimming by app, voice or button
- 800 series chip with S2 security and SmartStart
- SmartStart: scan the QR code, press 3 times, done in under a minute
- Timer and schedule support

## Specifications

| Item | Value |
| --- | --- |
| Dimming | 1–100% |
| Max load | 200W incandescent / 100W dimmable CFL·LED |
| Frequency | 908.42 MHz |
| Range | up to 1300 ft with Z-Wave LR (hub dependent) |

## Button and LED behaviour

| Action | Result |
| --- | --- |
| Press 1× | Toggle on / off |
| Press 3× | Z-Wave inclusion / exclusion mode |
| Press 2× quickly, hold the 3rd for 10s | Factory reset |

- **Blue** — status / inclusion
- **Purple** — remove / exclusion
- **Red** — network failure

## Troubleshooting

| Symptom | Fix |
| --- | --- |
| Hub cannot find the device | Move the plug closer to the hub. Exclude it first, then include again. |
| LED does not light | Test the outlet with another device. |
| Works by button but not in app | Re-run inclusion and check the hub frequency band. |

## Download

[MP21ZD(ZW39SU)Manual.pdf](https://forum.minoston.com/uploads/short-url/tJH2zwaKHT0G9qTPudi0jIO2PXR.pdf) (20.8 MB)
