Model: MP21ZD · Protocol: Z-Wave 800 Series Dimmer (908.42 MHz) · Use: Indoor
Features
- 1–100% stepless dimming by app, voice or button
- 800 series chip with S2 security and SmartStart
- SmartStart: scan the QR code, press 3 times, done in under a minute
- Timer and schedule support
Specifications
| Item | Value |
|---|---|
| Dimming | 1–100% |
| Max load | 200W incandescent / 100W dimmable CFL·LED |
| Frequency | 908.42 MHz |
| Range | up to 1300 ft with Z-Wave LR (hub dependent) |
Button and LED behaviour
| Action | Result |
|---|---|
| Press 1× | Toggle on / off |
| Press 3× | Z-Wave inclusion / exclusion mode |
| Press 2× quickly, hold the 3rd for 10s | Factory reset |
- Blue — status / inclusion
- Purple — remove / exclusion
- Red — network failure
Troubleshooting
| Symptom | Fix |
|---|---|
| Hub cannot find the device | Move the plug closer to the hub. Exclude it first, then include again. |
| LED does not light | Test the outlet with another device. |
| Works by button but not in app | Re-run inclusion and check the hub frequency band. |
Download
MP21ZD(ZW39SU)Manual.pdf (20.8 MB)